LiNX configuration
Note: The Scoot Control LiNX cannot function without a remote.
A LiNX system comprises a number of modules. Scoot Control is one of these available modules
Note: The LiNX system must have a firmware version of 6.2 or higher in order to be compatible with the Scoot Control.
Horn
The Scoot Control buttons are dedicated rules, which cannot be set in the LiNX software with the exception of the S4 horn button:
Note: When the horn button is pressed on the device, the LiNX command will activate all horns in the system. The parameter described above, allows the dealer to adjust the functionality, so that only 1 horn is sounded.
Grab functionality
The on/off button can be used to grab the focus. Pushing the focus back, however, to the user in the wheelchair is not possible.
Note: By default, both remote and attendant can grab focus, but this can be restricted in the LiNX system if needed: .