R-net trip codes
Trouble:
When a fault is detected by the device, an R-net trip code will be generated. The trip code will be shown on the joystick (if it is present and equipped with a graphic display). The trip code will also be logged in the R-net system and can be investigated using the R-net PC Programmer.
If you want to learn more about trip codes, see the Curtiss-Wright manual | SK77981-14 R-net Technical Manual.
| R-net trip code | Reason | Required action |
|---|---|---|
| 9600 | Uart overflow | Update firmware or replace PCB. |
| 9601 | Uart underflow | |
| 9602 | Packet transmission exceeded maximum number of retries | Update firmware or replace PCB. |
| 9603 | TX handle overflow | |
| 9604 | RX handle overflow | Update firmware or replace PCB. |
| 9605 | Invalid sequence number | |
| 9606 | Ack number does not match | Update firmware or replace PCB. |
| 9607 | Invalid packet descriptor | |
| 9608 | Incorrect R-net version | Update firmware or replace PCB. |
| 9609 | Chip tripped | |
| 960A | Invalid response when accessing a file | Update firmware or replace PCB. |
| 9620 | CPU error | |
| 9621 | Code error | Update firmware or replace PCB. |
| 9640 | One or more test flags not set | Redo tests and/or replace PCB. |
| 9641 | Software watchdog | Update firmware or replace PCB. |
| 9642 | There was a problem during the preparation of the R-net system | Check R-net fault on joystick display or in the R-net PC programmer. Check R-net configuration. |
| 9643 | Left sensor is faulty | Replace sensor board and calibrate. |
| 9644 | Right sensor is faulty | |
| 9645 | Left throttle is faulty | Replace throttle and calibrate. |
| 9646 | Right throttle if faulty | |
| 9647 | There is an R-net trip code | Check R-net fault on joystick display or in the R-net PC programmer. |
| 9648 | Factory test failed | A fault occurred during factory testing. |
| 9649 | Field test failed (calibration) | A fault occurred during field testing (calibration). |
| 9800 | API_MSG_SEND_TO_FREQUENTLY | Update firmware or replace PCB, check R-net configuration. |
| 9801 | API_MSG_DATA_OUT_OF_RANGE | |
| 9802 | API_MSG_ID_UNKNOWN | Update firmware or replace PCB, check R-net configuration. |
| 9803 | API_MSG_DATA_INCORRECT_AMOUNT | |
| 9804 | API_MSG_TOO_SHORT | Update firmware or replace PCB, check R-net configuration. |
| 9805 | API_MSG_TOO_LONG | |
| 9806 | API_MSG_NOT_ENABLED | Update firmware or replace PCB, check R-net configuration. |
| 9807 | API_RESPONDED_OUT_OF_TIME | |
| 9808 | API_MSG_REQUIEREMENT_WRONG | Update firmware or replace PCB, check R-net configuration. |
| 9809 | API_MSG_INVALID_IN_CURRENT_STATE | |
| 9810 | DATA_PACKET_WITH_INVALID_SEQ_NR | Update firmware or replace PCB, check R-net configuration. |
| 9811 | ACK_PACKET_WITH_INVALID_SEQ_NR | |
| 9812 | INVALID_HEADER | Update firmware or replace PCB, check R-net configuration. |
| 9813 | PACKET_TIMEOUT | |
| 9814 | CHIP_INT_ERR0 | Update firmware or replace PCB, check R-net configuration. |
| 9815 | CHIP_INT_ERR1 | |
| 9816 | HOST_RESTART_AFTER_CORRECT_INIT | Update firmware or replace PCB, check R-net configuration. |
| 9817 | HOST_INCOMPATIBLE_SERIAL_PROTOCOL_VERSION | |
| 9820 | CHIPSET_INTERNAL_QUEUE_OVERFLOW | Update firmware or replace PCB, check R-net configuration. |
| 9821 | CHIPSET_HEARTBEAT |