Operational test

CAUTION: Execute this test only on a level surface, with at least one metre of free space around the wheelchair.
CAUTION: The wheelchair may start to move during the test.
  1. Press S1 to activate the Scoot Control and the power chair.
  2. Check for any error message.
    Trouble: You can recognize an error on-board, when D11 and D15 are red, D12 and D14 are off and D13 flashes. The number of flashes indicates the error. See Error codes
  3. Move the handlebar slowly to the a side until you hear the parking brakes switch off.
  4. Immediately release the handlebar. You should hear the parking brake react within a few seconds.
  5. Repeat 3 and 4 three times for both sides.
  6. Move the throttle slowly down until you hear the parking brake switch off.
  7. Release the throttle. You should hear the parking brake react within a few seconds.
  8. Repeat 6 and 7 three times for both throttles.
  9. Check whether the power on/off button S1 functions properly.