Actuator Keypad

R-net version

You can connect an external Curtiss-Wright CJSM2 compatible Actuator Keypad to the Scoot Control R-net (P015-61) to control the actuators of the power chair.

See the Scoot Control User Manual or contact mo-vis for an overview of the Scoot Control parts and accessories.

Please refer to the Curtiss-Wright manual SK77981-14 | R-net Technical Manual for actuator settings and controls.

In the Scoot Control default settings, a key press will send an axis command to the R-net system.


Number	Action
1	Axis 1 moves UP
2	Axis 1 moves DOWN
...	...
9	Axis 5 moves UP
10	Axis 5 moves DOWN

A parameter is available to control 10 axes instead of 5 (see On-board configuration for more information).


Number	Action
1	Alternating UP - DOWN movements of Axis 1
2	Alternating UP - DOWN movements of Axis 2
...	...
9	Alternating UP - DOWN movements of Axis 9
10	Alternating UP - DOWN movements of Axis 10

LiNX version

You can connect an external LiNX-compatible keypad to the Scoot Control LiNX (P015-71) to control the actuators of the power chair.

A keypress will result in sending a command to the LiNX system. This can be configured using the LiNX access software.

Please refer to the GBK54036 LiNX Systems Installation Manual for actuator settings and controls.

Note: Toggle actions are supported by LiNX itself and should not be set via an on-board parameter on the Scoot Control like for the R-net version.