Defining parameter settings

The Multi Swing 2G movement, speed, angle and connections are fully adjustable with the mo-vis Configurator Software.

  1. Connect the device to a PC. Use a standard USB C-USB cable.
    Note:
    CAUTION: Before inserting a connector, remove the protective cover. If the connections are not used, always put or keep the protective covers in.
  2. Configure the parameters with the software.
  3. Upload the configuration.
  4. Test the configuration and adjust if necessary.
Note: Don't forget to save your settings in time. While you can immediately test your settings, they will be lost if you don't save them into the device before disconnecting.