Finetuning

Now, further tweaking of the Multi Swing 2G might be necessary to find an optimal position for the user.

Make sure that the arm is in the optimal position for the user
Make sure that the user can operate the arm and the mounted device as required
Make sure that you have found a robust and reliable position

If you have found an optimal position, tighten all the screws, so that you have a stable position.

It is possible that you want to shorten the arm. You can do so with a hacksaw. Make sure you place part B3 back on the arm afterward.

Note: It is best to shorten the arm when it is not in a mounted position.

CAUTION: Do not connect the part A1 to the wheelchair battery or another battery source while installing or adjusting part A or B to avoid any unwanted movement.