Input Controls
- Twister
- Twister Pro
- Actuator Keypad
- Multi Switch
  - About this manual
  - Important information
  - Warranty
  - Technical support
  - Warning labels
    Please read this manual, the safety instructions and warning texts carefully, in order to reduce the risks associated to the device. Our products are safe under normal and reasonably foreseeable operating conditions.
  - Limited liability
  - Preparations
  - Installation
  - Configuration
    - Defining parameter settings
    - Parameter settings
  - First time use
  - Maintenance
  - Error codes
  - Technical data

Defining parameter settings

Connect the device to a PC. Use a micro USB-USB cable.

CAUTION: Before inserting a jack or USB cable, remove the protective cover. If the connections are not used, always put or keep the protective covers in.
Configure the parameters with the software.
Upload the configuration.
Test the configuration and adjust if necessary.