Dynamic Controls parameters

For more information, please refer to the GBK54036 LiNX Systems Installation Manual.

LiNX control inputs recognize a number of distinct resistor bands. For each band, a different action can be selected (e.g. driving, actuator motions, profile and function navigation and lighting).

Control inputs can be configured to monitor for errors, such as short circuit, invalid open circuit, missing or unreliable states.

mo-vis has chosen resistor bands 1 and 10: the Twister Pro can perform monitoring function in these bands, when the dip switch is set to the right values (see Installation).

Note: This setting is only accessible with a LiNX Access Key DLX-HKEY-02.

Chair Set-up > Modules > Rem XXX > Left/Right Jack Socket Tip > Advanced > Monitored


Value	Description
Off	The Twister Pro will function as a normally open switch.
On	The Twister Pro will be able to detect both open- and short-circuits in the wiring. The error is indicated to the user and logged in the system.