Special Controls
- Micro Joystick
- Multi Joystick
- All-round Joystick
- Heavy Duty Joystick
- Heavy Duty Kit
  - About this manual
  - Important information
  - Warranty
  - Technical support
  - Warning labels
    Please read this manual, the safety instructions and warning texts carefully, in order to reduce the risks associated to the device. Our products are safe under normal and reasonably foreseeable operating conditions.
  - Limited liability
  - Preparations
  - Installation
  - Calibration
  - Testing
  - First time use
  - Maintenance
- Scoot Control
- Foot Control

Calibration

During installation, throw and center point of the joystick may change slightly. Therefore, it is necessary to test the joystick after installation and execute a recalibration.

For R-net: consult the PG Drives Technology (PGDT) manual.
For Curtis: consult the Curtis Instruments manual.

Note: If the calibration fails, check the mechanics of the heavy duty kit and check symmetry. If the mechanical system is mounted out of centre it is possible the deflection values stay too low in a certain direction.