Omni Joystick Connection

Purpose

A mo-vis Omni Joystick has a cable with a SUB D9 connector and a 3.5 mm jack connection. They can be plugged in directly to the electronics of the wheelchair. The joystick then controls the wheelchair in all its functions (driving, electric gears, lights …).

Connectivity

The Omni Joystick allows you to connect to a wheelchair with a Curtiss-Wright Omni or Omni2 display.

Optional mo-vis adapters allow you to connect the Omni Joystick to a wheelchair with:
  • DX: Joystick Interface Omni-DX (P002-31)
  • Easy Rider: Joystick Adapter Omni-Easy Rider (M002-90)
  • Otto Bock Curtis electronics: Joystick Interface Omni-Otto Bock Curtis (P002-37)
Note: Third-party adapters might also be compatible with the mo-vis Omni Joysticks.

Features

The Omni Joystick Connection is an integrated part of a mo-vis Omni Joystick and consists of:
  • Omni (SUB D9) connector with cable
  • 3.5 mm mono jack out with cable

Other information

These products were tested with an Omni 2 display by Curtiss-Wright.