Installation

Qualified service engineer

Only a qualified service engineer may install the device.

CAUTION: An incorrect programming of the wheelchair electronics may cause damage to the devices, or injury to the user.
CAUTION: Use proper tools to install and adjust the device. The use of improper tools may cause damage to the device.

Installation Plan

Set up an installation plan before beginning the installation. Based on the users' needs and capabilities, this plan should take into account:

  • Where which part of the device should be placed.
  • How the device will be operated.
  • A robust and reliable positioning. Hard or sudden movements of the wheelchair may not disorganize the installation.
Warning: Protect the device against bumps. Mind damaging the unit and wiring. Make sure that cabling is mounted in such a way that excessive wear and tear is avoided.
Warning: Make sure that loose parts of the cable are out of reach to avoid strangulation or other injuries.

Installation

  1. Mount the unit with suited mounting parts at the desired location.
  2. Connect the cabling to the wheelchair electronics: plug the 3.5 mm stereo jack in the mode socket of the standard R-net joystick or Scoot Control.
  3. Place and secure all cabling on the wheelchair.
    CAUTION: All wheelchair electronics must be switched off during installation.